|
|
| C-25 | |||||
| PRODUCT CODE NO. CP - 105A | |||||
| CPP CO-EX METALLIZABLE GRADE LOW HEAT SEALABLE | |||||
| Special designed for vacuum metallizing application. Goood aluminium bonding strength exceptional heat seal temperature & high seal strength. | |||||
| TECHNICAL DATA | |||||
| TYPICAL PROPERTIES | UNIT | TEST METHODS | TYPICAL VALUES | ||
| THICKNESS | micron |
Micrometer |
20 |
25 |
|
| YIELD | m2/ kg (min.) |
- |
55.56 |
44.44 |
|
| DENSITY | g/cm3 |
ASTM D-1505 |
0.90 |
0.90 |
|
| AVERAGE THICKNESS VARIATION | % (max.) |
ASTM E-252 |
± 3 |
± 3 |
|
| TENSILE STRENGTH | kg/mm2
(min.) |
MD |
ASTM
D-882 |
4 |
4 |
TD |
2 |
2 |
|||
| ELONGATION AT BREAK | %
(max.) |
MD |
ASTM
D-882 |
400 |
400 |
TD |
400 |
400 |
|||
| KINETIC C.O.F. | film/film (max.) |
ASTM D-1894 |
~ 0.9 |
~ 0.9 |
|
| SEALING TEMPERATURE | °c |
1 BAR 1 SEC |
120 |
120 |
|
| SEALING STRENGTH | g/cm (min.) |
- |
500 |
500 |
|
| HAZE | % |
ASTM D-1003 |
3.5 |
3.5 |
|
| GLOSS (Angle 45° ) | % (min.) |
ASTM D-2457 |
80 |
80 |
|
| WVTR | g/m2/24 hr
(max.) |
ASTM F-1249 |
12 |
10 |
|
| O2TR | cc/m2/24
hr (max.) |
ASTM D-3985 |
3,600 |
3,000 |
|
| WETTING TENSION | Dyne/cm (min.) |
ASTM D-2578 |
38 |
38 |
|
| DESCRIPTION OF SUPPLY | |
| PAPER CORE I.D. | 77 mm (3 in.) 153 mm (6 in.) |
| ROLL O.D. | max. 800 mm |
| WIDTH RANGE | 100 mm - 2,000 mm. |
| LENGTH RANGE | STANDARD 4,000 m., 6,000 m., (other length on request) |
| JOINT | maximum 10% per order |
| Food approval : complied with FDA & EU regulations (on request) Storage condition : should be keep at ambient temperature ~ 30°c and not over 40°c. and keep in dry storage. |
FURTHER TECHNICAL INFORMATION ON REQUEST The above standard film properties are subjected to change and periodical modification without prior notice, please re-check for the most update version with our Sales & Marketing Department. 08/04/2011 SD-TD-001/24 Rev.05 |