|
|
| B - 23 | |||||||
| PRODUCT CODE NO. OP - 121 R2 | |||||||
| BOPP CO-EX METALLIZED GRADE | |||||||
| Special designed for vacuum metallized application. Excellent metal adhesion and both sides heat sealable with good seal strength. | |||||||
| TECHNICAL DATA | |||||||
| TYPICAL PROPERTIES | UNIT | TEST METHODS | TYPICAL VALUES | ||||
| THICKNESS | micron |
Micrometer |
18 |
20 |
25 |
30 |
|
| YIELD | m2/ kg (min.) |
- |
61.73 |
55.56 |
44.44 |
37.04 |
|
| DENSITY | g/cm3 |
ASTM D-1505 |
0.90 |
0.90 |
0.90 |
0.90 |
|
| AVERAGE THICKNESS VARIATION | % (max.) |
ASTM E-252 |
± 3 |
± 3 |
± 3 |
± 3 |
|
| TENSILE STRENGTH | kg/mm2
(min.) |
MD |
ASTM
D-882 |
13 |
13 |
13 |
13 |
TD |
24 |
24 |
24 |
24 |
|||
| ELONGATION AT BREAK | %
(max.) |
MD |
ASTM
D-882 |
200 |
200 |
200 |
200 |
TD |
70 |
70 |
70 |
70 |
|||
| THERMAL SHRINKAGE (120° c 15 minutes) |
%
(max.) |
MD |
ASTM
D-1204 |
4.0 |
4.0 |
4.0 |
4.0 |
TD |
2.0 |
2.0 |
2.0 |
2.0 |
|||
| STATIC C.O.F. | film/film |
ASTM D-1894 |
0.5 - 0.7 |
0.5 - 0.7 |
0.5 - 0.7 |
0.5 - 0.7 |
|
| SEALING TEMPERATURE | °c |
1 BAR 1 SEC |
125 |
125 |
125 |
125 |
|
| SEALING STRENGTH | g/cm (min.) |
- |
100 |
100 |
100 |
100 |
|
| HAZE | % (max.) |
ASTM D-1003 |
2.0 |
2.0 |
2.5 |
2.5 |
|
| GLOSS (Angle 45° ) | % (min.) |
ASTM D-2457 |
75 |
75 |
75 |
75 |
|
| WVTR | g/m2/24 hr
(max.) |
ASTM F-1249 |
9 |
8 |
6 |
4 |
|
| O2TR | cc/m2/24
hr (max.) |
ASTM D-3985 |
2,100 |
2,000 |
1,800 |
1,600 |
|
| WETTING TENSION | Dyne/cm (min.) |
ASTM D-2578 |
38 |
38 |
38 |
38 |
|
| DESCRIPTION OF SUPPLY | |||||||
| PAPER CORE I.D. | 77 mm (3 in.) 153 mm (6 in.) | ||||||
| ROLL O.D. | max. 800 mm | ||||||
| WIDTH RANGE | 100 mm - 1,500 mm. (other width on request) | ||||||
| LENGTH RANGE | STANDARD 4,000 m., 6,000 m. (other length on request) | ||||||
| JOINT | maximum 10% per order | ||||||
| Food approval : complied with FDA & EU regulations (on request)
Storage condition : should be keep at ambient temperature ~ 30oC and not over 40oC. and keep in dry storage.
FURTHER TECHNICAL INFORMATION ON REQUEST
The above standard film properties are subjected to change and periodical modification without prior notice, please re-check for the most update version with our Sales & Marketing Department.
31/03/2011 SD-TD-001/16 |