|
|
| C - 27 | ||||
| PRODUCT CODE NO. CP - 109X | ||||
| CPP CO-EX ONE SIDE HEAT SEAL FILM | ||||
| CPP one side heat sealable film for form-fill-seal application. Exceptional slip property and low heat seal on seal side. Available for non treatment. | ||||
| TECHNICAL DATA | ||||
| TYPICAL PROPERTIES | UNIT | TEST METHODS | TYPICAL VALUE | |
| THICKNESS | micron |
Micrometer |
50 |
|
| YIELD | m2/kg (min.) |
- |
22.22 |
|
| DENSITY | g/cm3 |
ASTM
D-1505 |
0.90 |
|
| AVERAGE THICKNESS VARIATION | % (max.) |
ASTM E-252 |
± 3 |
|
| TENSILE STRENGTH | kg/mm2 (min.) |
MD |
ASTM
D-882 |
4 |
TD |
2 |
|||
| ELONGATION
AT BREAK | %
(min.) | MD |
ASTM
D-882 |
400 |
TD |
400 |
|||
| THERMAL SHRINKAGE (120° c 15 minutes) | %
(max.) |
MD |
ASTM
D-1204 |
0.7 |
TD |
0.7 |
|||
| KINETIC C.O.F. | film/film |
ASTM
D-1894 |
0.2 - 0.5 |
|
| SEALING TEMPERATURE | °C |
1 BAR 1 SEC |
120 |
|
| SEALING STRENGTH | g/cm (min.) |
- |
1000 |
|
| HAZE | % (max.) |
ASTM
D-1003 |
8.0 |
|
| GLOSS (angle 45° ) | % (min.) |
ASTM D-2457 |
70 |
|
| WVTR | g/m2/24hr
(max.) |
ASTM
F-1249 |
8 |
|
| O2TR | cc/m2/24hr
(max.) |
ASTM
D-3985 |
1,500 |
|
| DESCRIPTION OF SUPPLY | |
| PAPER CORE I.D. | 77 mm (3 in.) 153 mm (6 in.) |
| ROLL O.D. | max. 800 mm |
| WIDTH RANGE | 100 mm - 1,750 mm. |
| LENGTH RANGE | STANDARD 4,000 m., 6,000 m. (other length on request) |
| JOINT | maximum 10% per order |
| Food approval : complied with FDA & EU regulations (on request) Storage condition : should be keep at ambient temperature ~ 30°c and not over 40°c. and keep in dry storage. |
FURTHER TECHNICAL INFORMATION ON REQUEST The above standard film properties are subjected to change and periodical modification without prior notice, please re-check for the most update version with our Sales & Marketing Department. 25/04/2011 SD-TD-001/39 |