|
|
| B - 32 | ||||||||
| PRODUCT CODE NO. OP - 109 R3 | ||||||||
| BOPP CO-EX PEARLIZED OPAQUE LOW H/S | ||||||||
| Is widely used in surface printing for packaging application.
Excellent machinability with both sides heatsealable. TFI film shows the pearlized white opacity appearance. |
||||||||
| TECHNICAL DATA | ||||||||
| TYPICAL PROPERTIES | UNIT | TEST METHODS | TYPICAL VALUE | |||||
| THICKNESS | micron |
Micrometer |
25 |
30 |
35 |
40 |
50 | |
| YIELD | m2/kg (min.) |
- |
59.70 |
49.75 |
42.64 |
35.71 |
28.57 | |
| DENSITY | g/cm3 |
ASTM D-1505 |
0.65-0.70 |
0.65-0.70 |
0.65-0.70 |
0.68-0.72 |
0.68-0.72 | |
| TENSILE STRENGTH | kg/mm2
(min.) |
MD |
ASTM
D-882 |
6 |
6 |
6 |
6 |
6 |
TD |
12 |
12 |
12 |
12 |
12 | |||
| ELONGATION AT BREAK | %
(max.) |
MD |
ASTM
D-882 |
140 |
140 |
140 |
140 |
140 |
TD |
50 |
50 |
50 |
50 |
50 | |||
| THERMAL SHRINKAGE (120° c 15 minutes) |
%
(max.) |
MD |
ASTM
D-1204 |
4.0 |
4.0 |
4.0 |
4.0 |
4.0 |
TD |
2.0 |
2.0 |
2.0 |
4.0 |
4.0 | |||
| STATIC C.O.F. | film/film |
ASTM D-1894 |
0.3 - 0.4 |
0.3 - 0.4 |
0.3 - 0.4 |
0.3 - 0.4 |
0.3 - 0.4 | |
| SEALING TEMPERATURE | °c |
1 BAR 1 SEC |
115 |
115 |
115 |
115 |
115 | |
| SEALING STRENGTH | g/cm (min.) |
- |
80 |
80 |
80 |
80 |
80 | |
| GLOSS (angle 45° ) | % (min.) |
ASTM D-2457 |
26 |
26 |
26 |
26 |
26 | |
| WVTR | g/m2/24 hr
(max.) |
ASTM F-1249 |
5.0 |
4.2 |
3.6 |
3.2 |
3.0 | |
| O2TR | cc/m2/24
hr (max.) |
ASTM D-3985 |
1,700 |
1,600 |
1,500 |
1,400 |
1,200 | |
| WETTING TENSION | Dyne/cm (min.) |
ASTM D-2578 |
38 |
38 |
38 |
38 |
38 | |
| DESCRIPTION OF SUPPLY | |
| PAPER CORE I.D. | 77 mm (3 in.) 153 mm (6 in.) |
| ROLL O.D. | max. 800 mm |
| WIDTH RANGE | 100 mm - 1,500 mm. (other width on request) |
| LENGTH RANGE | STANDARD 4,000 m., 6,000 m., 8,000 m. (other length on request) |
| JOINT | maximum 10% per order |
| Food approval : complied with FDA & EU regulations (on request) Storage condition : should be keep at ambient temperature ~ 30°c and not over 40°c. and keep in dry storage. |
FURTHER TECHNICAL INFORMATION ON REQUEST The above standard film properties are subjected to change and periodical modification without prior notice, please re-check for the most update version with our Sales & Marketing Department. 15/06/2011 SD-TD-001/30 |