|
|
| B - 16a | ||||
| PRODUCT CODE NO. OP - 117 | ||||
| BOPP HI HAZE MATT PRINTING & LAMINATION | ||||
| Innovative matt film for soft& paper look packaging. One side matty other side glossy. Specially designed for high quality printing on both rotogravure and flexographic printing. Both sides high corona treatment allows high anchorage of inks that suitable for both solvent and environmetally water based inks. The high matt side eliminating light reflection that creating attractive and paper look for packaging. | ||||
| TECHNICAL DATA | ||||
| TYPICAL PROPERTIES | UNIT | TEST METHODS | TYPICAL VALUE | |
| THICKNESS | micron |
Micrometer |
18 |
|
| YIELD | m2/ kg (min.) |
- |
67.75 |
|
| DENSITY | g/cm3 |
ASTM D-1505 |
0.82 |
|
| AVERAGE THICKNESS VARIATION | % (max.) |
ASTM E-252 |
± 3 |
|
| TENSILE STRENGTH | kg/mm2
(min.) |
MD |
ASTM
D-882 |
8 |
TD |
18 |
|||
| ELONGATION AT BREAK | %
(max.) |
MD |
ASTM
D-882 |
220 |
TD |
70 |
|||
| THERMAL SHRINKAGE (120°c 15 minutes) |
%
(max.) |
MD |
ASTM
D-1204 |
4.0 |
TD |
2.0 |
|||
| KINETIC C.O.F. | film/film |
ASTM D-1894 |
0.4 - 0.6 |
|
| HAZE | % |
ASTM D-1003 |
80 ±5 |
|
| GLOSS (matt side) | % (max.) |
ASTM D-2457 |
10 |
|
| WVTR | g/m2/24 hr(max.) |
ASTM
F-1249 |
9 |
|
| O2TR | Cc/m2/24hr (max.) |
ASTM
D-3985 |
2,300 |
|
| WETTING TENSION ONE SIDE |
Dyne/cm (min.) |
ASSTM D-2578 |
38 |
|
| BOTH SIDES (matt/gloss) | 36/38 |
|||
| DESCRIPTION OF SUPPLY | |
| PAPER CORE I.D. | 77 mm (3 in.) 153 mm (6 in.) |
| ROLL O.D. | max. 800 mm |
| WIDTH RANGE | 100 mm - 1,500 mm. Allowance 0,+3 mm. |
| LENGTH RANGE | STANDARD 2,000m., 4,000 m., 6,000 m. (other length on request) |
| JOINT | maximum 10% per order |
| Food approval : complied with FDA & EU regulations (on request)
Storage condition : should be keep at ambient temperature ~ 30oC and not over 40oC. and keep in dry storage.
FURTHER TECHNICAL INFORMATION ON REQUEST The above standard film properties are subjected to change and periodical modification without prior notice, please re-check for the most update version with our Sales & Marketing Department.
12/04/2011 SD-TD-001/52 |