|
|
| B -
14b |
|||||||
| PRODUCT CODE NO. OP
- 103C |
|||||||
| BOPP
PLAIN GARMENT BAG WITH TREATMENT |
|||||||
| Special formulated for garment bag application.
Excellent clarity, good dimensional stability, flatness and strength. Available for one side and both side treatment. |
|||||||
| TECHNICAL DATA | |||||||
| TYPICAL
PROPERTIES |
UNIT
|
TEST
METHODS |
TYPICAL
VALUE |
||||
| THICKNESS | micron |
Micrometer |
20 |
25 |
28 |
30 |
|
| YIELD | m2/ kg (min.) |
- |
55.56 |
44.44 |
39.68 |
37.04 |
|
| DENSITY | g/cm3 |
ASTM D-1505 |
0.90 |
0.90 |
0.90 |
0.90 |
|
| AVERAGE THICKNESS VARIATION | % (max.) |
ASTM E-252 |
± 3 |
± 3 |
± 3 |
± 3 |
|
| TENSILE STRENGTH | kg/mm2
(min.) |
MD |
ASTM D-882 |
13 |
13 |
13 |
13 |
| TD |
24 |
24 |
24 |
24 |
|||
| ELONGATION AT BREAK | %
(max.) |
MD |
ASTM
D-882 |
170 |
170 |
170 |
170 |
| TD |
70 |
70 |
70 |
70 |
|||
| THERMAL SHRINKAGE
(120oc 15 minutes) |
%
(max.) |
MD |
ASTM
D-1204 |
4.0 |
4.0 |
4.0 |
4.0 |
| TD |
2.0 |
2.0 |
2.0 |
2.0 |
|||
| STATIC C.O.F. | film/film |
ASTM D-1894 |
0.35-0.50 |
0.35-0.50 |
0.35-0.50 |
0.35-0.50 |
|
| HALF DECAY TIME | seconds (max.) |
STATIC HONEST METER |
600 |
600 |
600 |
600 |
|
| HAZE | % (max.) |
ASTM D-1003 |
1.5 |
1.8 |
2.0 |
2.0 |
|
| GLOSS (angle 45o) | % (min.) |
ASTM D-2457 |
85 |
85 |
85 |
85 |
|
| WETTING TENSION ONE SIDE |
Dyne/cm (min.) |
ASTM D-2578 |
38 | 38 | 38 | 38 | |
| BOTH SIDES | 36/38 | 36/38 | 36/38 | 36/38 | |||
| DESCRIPTION OF SUPPLY | |||||||
| PAPER CORE I.D. | 77 mm (3 in.) 153 mm (6 in.) | ||||||
| ROLL O.D. | max. 800 mm | ||||||
| WIDTH RANGE | 100 mm - 1,500 mm. (other width on request) | ||||||
| LENGTH RANGE | STANDARD 4,000 m., 6,000 m. (other length on request) | ||||||
| JOINT | maximum 10% per order | ||||||
| Food approval : complied with FDA & EU regulations (on request) Storage condition : should be keep at ambient temperature ~ 30°c and not over 40°c. and keep in dry storage. |
FURTHER TECHNICAL INFORMATION ON REQUEST The above standard film properties are subjected to change and periodical modification without prior notice, please re-check for the most update version with our Sales & Marketing Department. 12/04/2011 SD-TD-001/04 |
| B -
14b |
||||||||
| PRODUCT CODE NO. OP
- 103C |
||||||||
| BOPP
PLAIN GARMENT BAG WITH TREATMENT |
||||||||
| Special formulated for garment bag application.
Excellent clarity, good dimensional stability, flatness and strength. Available for one side and both side treatment. |
||||||||
| TECHNICAL DATA | ||||||||
| TYPICAL
PROPERTIES |
UNIT
|
TEST
METHODS |
TYPICAL
VALUE |
|||||
| THICKNESS | micron |
Micrometer |
35 |
40 |
50 |
60 |
||
| YIELD | m2/ kg (min.) |
- |
31.75 |
27.78 |
22.22 |
18.52 |
||
| DENSITY | g/cm3 |
ASTM D-1505 |
0.90 |
0.90 |
0.90 |
0.90 |
||
| AVERAGE THICKNESS VARIATION | % (max.) |
ASTM E-252 |
± 3 |
± 3 |
± 3 |
± 3 |
||
| TENSILE STRENGTH | kg/mm2
(min.) |
MD |
ASTM D-882 |
13 |
13 |
13 |
13 |
|
| TD |
24 |
24 |
24 |
24 |
||||
| ELONGATION AT BREAK | %
(max.) |
MD |
ASTM
D-882 |
170 |
170 |
170 |
170 |
|
| TD |
70 |
70 |
70 |
70 |
||||
| THERMAL SHRINKAGE
(120oc 15 minutes) |
%
(max.) |
MD |
ASTM
D-1204 |
4.0 |
4.0 |
4.0 |
4.0 |
|
| TD |
2.0 |
2.0 |
2.0 |
2.0 |
||||
| STATIC C.O.F. | film/film |
ASTM D-1894 |
0.35-0.50 |
0.35-0.50 |
0.35-0.50 |
0.35-0.50 |
||
| HALF DECAY TIME | seconds (max.) |
STATIC HONEST METER |
600 |
600 |
600 |
600 |
||
| HAZE | % (max.) |
ASTM D-1003 |
2.2 |
2.2 |
2.2 |
2.5 |
||
| GLOSS (angle 45o) | % (min.) |
ASTM D-2457 |
85 |
85 |
85 |
85 |
||
| WETTING TENSION ONE SIDE |
Dyne/cm (min.) |
ASTM D-2578 |
38 | 38 | 38 | 38 | ||
| BOTH SIDES | 36/38 | 36/38 | 36/38 | 36/38 | ||||
| DESCRIPTION OF SUPPLY | |||||||
| PAPER CORE I.D. | 77 mm (3 in.) 153 mm (6 in.) | ||||||
| ROLL O.D. | max. 800 mm | ||||||
| WIDTH RANGE | 100 mm - 1,500 mm. (other width on request) | ||||||
| LENGTH RANGE | STANDARD 4,000 m., 6,000 m. (other length on request) | ||||||
| JOINT | maximum 10% per order | ||||||
| Food approval : complied with FDA & EU regulations (on request) Storage condition : should be keep at ambient temperature ~ 30°c and not over 40°c. and keep in dry storage. |
FURTHER TECHNICAL INFORMATION ON REQUEST The above standard film properties are subjected to change and periodical modification without prior notice, please re-check for the most update version with our Sales & Marketing Department. 12/04/2011 SD-TD-001/04 |