Un title page

B - 03
PRODUCT CODE NO. OP - 115 R3
BOPP PLAIN BOARD LAMINATION
Designed especially for board lamination. Excellent clarity, very good strength, dimensional stability and flatness. Providing low electrostatic charge without additives blooming, available for one side and both sides corona treatment.
TECHNICAL DATA
TYPICAL PROPERTIES	UNIT		TEST METHODS	TYPICAL VALUE
THICKNESS	micron		Micrometer	12	15
YIELD	m²/ kg (min.)		-	92.59	74.07
DENSITY	g/cm³		ASTM D-1505	0.90	0.90
AVERAGE THICKNESS VARIATION	% (max.)		ASTM E-252	± 3	± 3
TENSILE STRENGTH	kg/mm² (min.)	MD	ASTM D-882	13	13
		TD		24	24
ELONGATION AT BREAK	% (max.)	MD	ASTM D-882	200	200
		TD		70	70
THERMAL SHRINKAGE (120^oc 15 minutes)	% (max.)	MD	ASTM D-1204	4.0	4.0
		TD		2.0	2.0
STATIC C.O.F.	film/film		ASTM D-1894	0.35	0.35
HALF DECAY TIME	seconds (max.)		STATIC HONEST METER	300	300
HAZE	% (max.)		ASTM D-1003	2.0	2.0
GLOSS (angle 45^o)	% (min.)		ASTM D-2457	85	85
WVTR	g/m²/24 hr (max.)		ASTM F-1249	13	11
O₂TR	cc/m²/24 hr (max.)		ASTM D-3985	3,000	2,700
WETTING TENSION ONE SIDE	Dyne/cm (min.)		ASTM D-2578	38	38
BOTH SIDES				36/38	36/38
DESCRIPTION OF SUPPLY
PAPER CORE I.D.	77 mm (3 in.) 153 mm (6 in.)
ROLL O.D.	max. 800 mm
WIDTH RANGE	100 mm - 2,000 mm. (other width on request)
LENGTH RANGE	STANDARD 4,000 m., 6,000 m. (other lenght on request)
JOINT	maximum 10% per order

Food approval : complied with FDA & EU regulations (on request) Storage condition : should be keep at ambient temperature ~ 30^oC and not over 40^oC. and keep in dry storage.

FURTHER TECHNICAL INFORMATION ON REQUEST

The above standard film properties are subjected to change and periodical modification without prior notice, please re-check for the most update version with our Sales & Marketing Department.

12/04/2011 SD-TD-001/22

B - 03
PRODUCT CODE NO. OP - 115 R2
BOPP PLAIN BOARD LAMINATION
Designed especially for board lamination. Excellent clarity, very good strength, dimensional stability and flatness. Providing low electrostatic charge without additives blooming, available for one side and both sides corona treatment.
TECHNICAL DATA
TYPICAL PROPERTIES	UNIT		TEST METHODS	TYPICAL VALUE
THICKNESS	micron		Micrometer	18	20
YIELD	m²/ kg (min.)		-	61.73	55.56
DENSITY	g/cm³		ASTM D-1505	0.90	0.90
AVERAGE THICKNESS VARIATION	% (max.)		ASTM E-252	± 3	± 3
TENSILE STRENGTH	kg/mm²(min.)	MD	ASTM D-882	13	13
		TD		24	24
ELONGATION AT BREAK	% (max.)	MD	ASTM D-882	200	200
		TD		70	70
THERMAL SHRINKAGE (120°c 15 minutes)	% (max.)	MD	ASTM D-1204	4.0	4.0
		TD		2.0	2.0
STATIC C.O.F.	film/film		ASTM D-1894	0.25 - 0.45	0.25 - 0.45
HALF DECAY TIME	seconds(max.)		STATIC HONEST METER	300	300
HAZE	% (max.)		ASTM D-1003	1.2	1.2
GLOSS (angle 45°)	% (min.)		ASTM D-2457	85	85
WVTR	g/m²/24hr (max.)		ASTM F-1249	9	8
O₂TR	cc/m²/24hr (max.)		ASTM D-3985	2,300	2,000
WETTING TENSION ONE SIDE	Dyne/cm (min.)		ASTM D-2578	38	38
BOTH SIDES				36/38	36/38
DESCRIPTION OF SUPPLY
PAPER CORE I.D.	77 mm (3 in.) 153 mm (6 in.)
ROLL O.D.	max. 800 mm
WIDTH RANGE	100 mm - 2,000 mm. (other width on request)
LENGTH RANGE	STANDARD 4,000 m., 6,000 m.(other length on request)
JOINT	maximum 10% per order

Food approval : complied with FDA & EU regulations (on request) Storage condition : should be keep at ambient temperature ~ 30^oC and not over 40^oC. and keep in dry storage.

FURTHER TECHNICAL INFORMATION ON REQUEST

The above standard film properties are subjected to change and periodical modification without prior notice, please re-check for the most update version with our Sales & Marketing Department.

12/04/2011 SD-TD-001/22