|
|
| B - 02 | ||||||||||||||
| PRODUCT CODE NO. OP - 130 R1 | ||||||||||||||
| BOPP PLAIN ADHESIVE TAPE | ||||||||||||||
| Special formulated for adhesive tape application. Excellent bonding strength to glue coating , good dimensional stability and high tensile strength. | ||||||||||||||
| TECHNICAL DATA | ||||||||||||||
| TYPICAL PROPERTIES | UNIT | TEST METHODS | TYPICAL VALUE | |||||||||||
| THICKNESS | micron |
Micrometer |
17 |
18 |
22 |
23 |
25 |
28 |
30 |
|||||
| YIELD | m2/kg (min.) |
- |
65.36 |
61.73 |
50.51 |
48.31 |
44.44 |
39.68 |
37.04 |
|||||
| DENSITY | g/cm3 |
ASTM D-1505 |
0.9 |
0.9 |
0.9 |
0.9 |
0.9 |
0.9 |
0.9 |
|||||
| AVERAGE THICKNESS VARIATION | % (max.) |
ASTM E-252 |
± 3 |
± 3 |
± 3 |
± 3 |
± 3 |
± 3 |
± 3 |
|||||
| TENSILE STRENGTH | kg/mm2
(min.) |
MD |
ASTM D-882 |
13 |
13 |
13 |
13 |
13 |
13 |
13 |
||||
TD |
24 |
24 |
24 |
24 |
24 |
24 |
24 |
|||||||
| ELONGATION AT BREAK | %
(max.) |
MD |
ASTM D-882 |
170 |
170 |
170 |
170 |
170 |
170 |
170 |
||||
TD |
70 |
70 |
70 |
70 |
70 |
70 |
70 |
|||||||
| THERMAL SHRINKAGE (120° c 15min.) |
%
(max.) |
MD |
ASTM D-1204 |
4.0 |
4.0 |
4.0 |
4.0 |
4.0 |
4.0 |
4.0 |
||||
TD |
2.0 |
2.0 |
2.0 |
2.0 |
2.0 |
2.0 |
2.0 |
|||||||
| C.O.F. | film/film |
ASTM D-1894 |
0.4-0.6 |
0.4-0.6 |
0.4-0.6 |
0.4-0.6 |
0.4-0.6 |
0.4-0.6 |
0.4-0.6 |
|||||
| HAZE | % (max.) |
ASTM D-1003 |
2.0 |
2.0 |
2.0 |
2.0 |
2.0 |
2.0 |
2.0 |
|||||
| GLOSS (angle 45° ) | % (min.) |
ASTM D-2457 |
85 |
85 |
85 |
85 |
85 |
85 |
85 |
|||||
| WETTING TENSION | Dyne/cm (min.) |
ASTM D-2578 |
38 |
38 |
38 |
38 |
38 |
38 |
38 |
|||||
|
||||||||||||
| Food approval : complied with FDA & EU regulations (on request)
Storage condition : should be keep at ambient temperature ~ 30oC and not over 40oC. and keep in dry storage. FURTHER TECHNICAL INFORMATION ON REQUEST The above standard film properties are subjected to change and periodical modification without prior notice, please re-check for the most update version with our Sales & Marketing Department.
31/03/2011 SD-TD-001/06 |
| B - 02 | |||||||
| PRODUCT CODE NO. OP - 130 R1 | |||||||
| BOPP PLAIN ADHESIVE TAPE | |||||||
| Special formulated for adhesive tape application. Excellent bonding strength to glue coating , good dimensional stability and high tensile strength. | |||||||
| TECHNICAL DATA | |||||||
| TYPICAL PROPERTIES | UNIT | TEST METHODS | TYPICAL VALUE | ||||
| THICKNESS | micron |
Micrometer |
40 |
50 |
60 |
70 |
|
| YIELD | m2/kg (min.) |
- |
27.78 |
22.22 |
18.52 |
15.87 |
|
| DENSITY | g/cm3 |
ASTM D-1505 |
0.90 |
0.90 |
0.90 |
0.90 |
|
| AVERAGE THICKNESS VARIATION | % (max.) |
ASTM E-252 |
± 3 |
± 3 |
± 3 |
± 3 |
|
| TENSILE STRENGTH | kg/mm2
(min.) |
MD |
ASTM D-882 |
13 |
13 |
13 |
13 |
TD |
24 |
24 |
24 |
24 |
|||
| ELONGATION AT BREAK | %
(max.) |
MD |
ASTM
D-882 |
170 |
170 |
170 |
170 |
TD |
70 |
70 |
70 |
70 |
|||
| THERMAL SHRINKAGE (120°c 15min.) |
%
(max.) |
MD |
ASTM
D-1204 |
4.0 |
4.0 |
4.0 |
4.0 |
TD |
2.0 |
2.0 |
2.0 |
2.0 |
|||
| C.O.F. | film/film |
ASTM D-1894 |
0.4 - 0.6 |
0.4 - 0.6 |
0.4 - 0.6 |
0.4 - 0.6 |
|
| HAZE | % (max.) |
ASTM D-1003 |
2.0 |
2.0 |
2.0 |
2.0 |
|
| GLOSS (angle 45° ) | % (min.) |
ASTM D-2457 |
85 |
85 |
85 |
85 |
|
| WETTING TENSION | Dyne/cm (min.) |
ASTM D-2578 |
38 |
38 |
38 |
38 |
|
| DESCRIPTION OF SUPPLY | |
| PAPER CORE I.D. | 77 mm (3 in.) 153 mm (6 in.) |
| ROLL O.D. | max. 800 mm |
| WIDTH RANGE | 100 mm - 2,000 mm. (other width on request) |
| LENGTH RANGE | STANDARD 4,000 m., 6,000 m., 8,000 m. (other length on request) |
| JOINT | maximum 10% per order |
| Food approval : complied with FDA & EU regulations (on request)
Storage condition : should be keep at ambient temperature ~ 30oC and not over 40oC. and keep in dry storage.
FURTHER TECHNICAL INFORMATION ON REQUEST The above standard film properties are subjected to change and periodical modification without prior notice, please re-check for the most update version with our Sales & Marketing Department.
31/03/2011 SD-TD-001/06 |